PRODUCTS - INDUSTRIAL INVERTERS

  1. Home
  2. PRODUCTS - INDUSTRIAL INVERTERS

PELICAN 3000 BI-DIRECTIONAL INVERTER

This bi-directional inverter is so unique, that it makes it suitable for computer and IT applications also. Thanks to its smart design, which offers less than 5 ms changeover time. Another important yet unmatched feature is that it comes with inbuilt IGBT based rectifier charger. This gives near unity power factor, and minimal distortion levels on to the supply side.

Pelican inverter has many unparallel features, which gives best ROI to the user and helps in keeping the process uninterrupted.



    • Multiple 32 bit DSP controllers
    • Inbuilt IGBT based battery charger
    • Changeover time < 5 ms
    • Space Vector Modulation
    • 128 x 64 Graphics display
    • High efficiency
    • True Bi-directional Inverter
    • Modular construction gives higher MTTR (above 30 kVA)
    • Battery charging through Grid up to 100%
    • Inbuilt isolation transformer for galvanic isolation
    • Paralleling feature enabled to enhance power capacity
  •  
    System Rating(kVA) 10 15/20 30 40/50 60 100/120 160 200
    Mains Input
    Input Supply 415 VAC , 50 Hz (-20%, +15%),3 Phase 4 Wire
    Battery
    Battery Voltage 240 V DC 360 V DC 480 V DC
    Inverter
    Power in KW 8 12/16 24 32/40 48 80/96 128 160
    Switching Element IGBT
    Control 32 Bit DSP controlled
    Nominal Output Voltage 415 VAC L - L, 3 Phase 4 Wire
    Nominal Frequency 50 Hz
    Output Waveform Sine Wave
    Output THDv < 3% non-linear
    Phase unbalance < 1deg
    Load Power Factor 0.6 lag to 1 (within kVA and kW rating)
    Voltage regulation ± 2%
    Voltage Stability in dynamic condition Complies with IEC/EN 62040-3, Class 1
    Output voltage distortion with 100% linear load < 2%
    Inverter efficiency Up to 90% Up to 93% Up to 94%
    Protection degree IP 20
    Colour RAL 7016, Texture
    Cooling Forced Air
    Galvanic Isolation Inbuilt isolation transformer at inverter output
    Protection Under / Over voltage for Input, Output & Battery
      Output overload, Short circuit, Over temperature
    Display Parameter 1. Battery - Voltage, Current
      2. Mains - Voltage, Current
      3. Inverter - Voltage, Current, Inv. heat sink temp., Power
    Indications Battery on Float, Battery on Boost, Battery low, Battery Charging / Discharging,
      Mains Switch ON, Inverter Switch ON, Mains ON, Load ON, Inverter ON, Manual Bypass ON
    Environment  
    Temperature Operating 0 to 40° C
    Max. Relative humidity @ 25°C (non condensing) Up to 95%
    Acoustic Noise @ 1m (Ref. ISO 3746) ≤ 62 dBA ≤ 65 dBA ≤ 68 dBA
    Max. Altitude above sea level without de-rating 1000 m
    Standard Compliance  
    Enclosure Protection Grade IP 20
    Testing IEC 62040 - 3

  • Click to below to Download the Documents Download